Application Instructions | Washing & Care
Screen Print Transfer Pressing Instructions (commercial style heat press)
- 325 degrees for 7 seconds
- HEAVY EVEN PRESSURE
- No teflon sheets, butcher paper, or any covers
- Hot Peel, immediately peel the transfers when heat is removed
Screen Print Transfer Pressing Instructions (Cricut Easy Press)
- 350 degrees for 30 seconds
- HEAVY EVEN PRESSURE (use body weight)
- No teflon sheets, butcher paper, or any covers
- Hot Peel, immediately peel the transfer when heat is removed
For video instructions visit our official Instagram page @_lovelycreationsslv
Washing & Caring instructions for Screen Prints
Caring for your heat transfer decorated garment is simple and if applied and cared for properly, will last the life of the garment. We recommend waiting at least 24 hours after pressing a garment to perform a wash / dry cycle.
- Washing the garment inside out is the best way to prevent premature wear and tear.
- Cold wash only and hang to dry or tumble dry
- All order come with pressing instructions
Application Instructions for UV-DTF
- Make sure your glass cup is clean (or any other surface) you are applying the transfer to and DRY. (We recommend washing your cups/surfaces with dish soap and water)
- Before removing white backing, scrape the design with a squeegee to ensure the entire design transfers to the clear film correctly.
- Peel the transfer off the white backing, starting with the corner
- Line to the transfer onto your glass cup or surface to your liking, PLEASE REMEMBER the adhesive is extremely strong. This means once the transfer sticks its almost impossible to take off.
- Once design is placed, use a squeegee over the entire design to push any air bubbles out.
- Heavily rub the entire design a few times to ensure everything is adhered correctly.
- Slowly peel the clear film off and you're done!
For video instructions head to our instagram @_lovelycreationsslv
Care & Washing Instructions for UV-DTF
UV-DTF transfers are permanent adhesive that are waterproof. You should never microwave, never place in dishwasher, or soak any item that you applied these to. These do not require any heat to apply.
Iron On Patches (Chenille & Others) Pressing Instructions
- Set heat press to 330-350 degrees on heavy pressure.
- Lay patch on garment, cover with a teflon/butcher paper and press for 20 seconds.
- Turn garment inside out and press for 35 seconds WITH NO COVERS.
Iron On Patch Washing Instructions
Iron on patches are permanent, we recommend you do not use laundry softener when washing.
Sublimation Transfers (Fabric)
SUBLIMATION PRESSING INSTRUCTIONS
YOU MUST HAVE KNOWLEDGE ON SUBLIMATION WHEN PURCHASING THESE TRANSFERS. It requires a polyester material and light colored material.
- 385-400 degrees;
- Pre press for 7 seconds;
- Add transfer faced down on garment
- Cover with parchment paper, place parchment paper inside shirt to prevent dye migration.
- Press for 45-60 seconds.
- Peel off and done